Glacier Filtration

X
  • No products in the list
• Pre Reverse Osmosis Membranes
• Desalination
• Remediation
• Potable Water Treatment
• Tertiary Water Treatment
• Stormwater Harvesting
• Municipal Water Treatment
• Industrial Water Treatment

  • Manufactured from Polyamide PA-6

  • 100% Recyclable by depolymerisation

  • Maximum Working Temperature: 50°C

  • Maximum Working Pressure: 10.5 bar

  • Burst Pressure: 42 bar

  • Design Safety Factor 4:1

  • This Vessel is suited for NaCl and resistant to <30% Concentrations of HCl, H2SO4, or NaOH at temperatures below 50°C. Please check the chemical resistance chart for more details.

  • Our Polyamide Filter Housings are designed according to the following globally recognised international standards:

    • Design calculations to AD 2000 merkblatt

    • Conformity to Directive PED 2014/68/EC

    • Complies with the requirements of AS1210 Section 10 Non-metallic vessels

    • The calculation methods, raw material requirements, and tests are performed following these standards




Properties of Polyamide PA-66:

  • Melting Point: 220°C

  • Tensile Strength: 82 N/mm2

  • Flexural Strength: 3300 N/mm2


  • Non-Corrosive - 100% Manufactured from Plastic Materials

  • 100% Recyclable

  • Vacuum Resistant

  • One Piece Moulded Construction

  • Fatigue and Abrasion Resistant

  • UV Stabilised

  • Union connections either Top/Bottom or Lateral

  • Suited to all types of water quality including sea water

Polyamide Cartridge Filter Housing

Polyamide Cartridge Filter housings are completely one-peice moulded construction. The superior and consistent quality and reliability provides our clients and operators with outstanding operational integrity.

The cartridge filter range is available in various sizes and configurations.

Standard and HFU Unit Cartridge Filter Housing suitable for the following cartridges:
• 2.5” Standard diameter
• 20”- 50” long
• Polyspun Sediment
• Pleated Sediment
• Absolute Rated
• GAC and Carbon Block
• 6” diameter HFU
• 20”- 60” long

Polyamide Cartridge Filter Housing

Polyamide Cartridge Filter housings are completely one-peice moulded construction. The superior and consistent quality and reliability provides our clients and operators with outstanding operational integrity.

The cartridge filter range is available in various sizes and configurations.

Standard and HFU Unit Cartridge Filter Housing suitable for the following cartridges:
• 2.5” Standard diameter
• 20”- 50” long
• Polyspun Sediment
• Pleated Sediment
• Absolute Rated
• GAC and Carbon Block
• 6” diameter HFU
• 20”- 60” long

Gallery